Features of polycarbonate greenhouse Harvest PC

By | greenhouse

The depth of the material is 4 mm.

If you want, you can boost the period of the structure to 6 metres or more. To try it, it is sufficient to attach a two-meter expansion. When selecting a drawing, then pay attention to the distance between the arches. This figure needs to be 65 cm, and that’s the most appropriate duration for the specified thickness of this substance. The width of the doorways based on the manufacturer’s drawing is 90 cm.

Before building a polycarbonate greenhouse, then it is necessary to choose a spot for its location. If this is done correctly, you can provide yourself with a harvest of fresh vegetables for the whole year.

The place for the future greenhouse is marked instantly at the preparation of their garden plot. In order to melt the snow in the positioning of the greenhouse as soon as possible, the best point on the site will be a slight elevation. Additionally, in this place will not need to worry about significant humidity as dirt and atmosphere in the building.

Build a polycarbonate greenhouse in a raised site – intends to care for the optimal temperatures indoors.

If it is not feasible to put a greenhouse in an elevated place, you will have to pour a layer of fine crushed stone around 20 cm and the exact same layer of fertile land to make seedbeds.

Before building a greenhouse on your garden plot, you should also consider where and how this structure will be installed. First, you have to select a location for this. The greenhouse should be located at a metropolitan region at least a couple meters away from homes, barns and other structures.

How to install a greenhouse in Line with the Faces of the Planet

Be sure to measure the dirt surface – it is ideal to even remove the top layer. This can also eliminate weed seeds. And for simplicity of work, remove the dirt in an area that is about a meter wider on each side of the rectangle you want.

It’s also worth considering using a foundation. As manufacturers say, today most greenhouses do not need it, particularly if they (greenhouses) are employed only in the spring and summer period. However, seasoned anglers still suggest making at least a basic foundation from a bar. It’s extremely simple – it is sufficient to associate with each other utilizing metal corners and screws four parts of wood with a cross-section of 10 * 10 cm. The dimensions of such a foundation ought to be equivalent to the base of the upcoming greenhouse.

Simple bar foundation

You could also make a strip foundation of concrete. He is more reliable than a bar foundation, but demands more financial and labor expenses. By the way, the rainwater, which is utilised in winter, without it and do not do with it at all.

Stages of the formation of a strip base: a schematic representation

Many manufacturers counsel to put in greenhouse structures without creating a base. For this intention, they equip the frame with specific T-shaped legs, so that the construction was securely fixed. However, as practice shows, it is still crucial to construct a foundation: so and the foundation will be more rigorously fixed and also the elements of the foundation in touch with the ground, will be kept much longer in its original condition.

The principal issue is to see to the material with specific agents to protect the timber from moisture. The substance is normally installed on concrete cubes which are dug into the ground. To get a six-meter arrangement, they want 10 pieces: four to each side and one in the center of the endings.

Before you perform the greenhouse , you want to choose the best spot for this. It must be an even website, so the frame was found evenly, without distortions. It needs to be bright and not obscured by trees or buildings.